中文 » English » Browse By Category » Biosensing » Oxygen Measurement » Dissolved Oxygen Meter & Electrode
Dissolved Oxygen Meter & Electrode
|
- Measures gas and dissolved oxygen
- Low oxygen consumption
- 2mm electrode tip
|
| Description |
Details
Isolation prevents adverse interaction with other electrodes and instruments. Highly accurate and stable SYS-ISO2 measures oxygen concentrations in aqueous solutions and in gas mixtures. Measurement modes are percent oxygen, parts per million, and oxygen reduction current in nanoamperes.
Detection limit
The lower detection limit (DL) for SYS-ISO2 (in gaseous or in liquid phase) is 0.1 ppm or 0.1%. Oxygen concentration around 0.5 ppm or 0.5% and up can be routinely measured in the gaseous or in the liquid phases. DL for a particular sensor tends to be different in gaseous and liquid phases when the baseline noise level is also different. In the case of SYS-ISO2, however, the baseline noise level is very close whether the electrode is immersed in solution or used in the gaseous phase, so DL for the SYS-ISO2 remains relatively close in either phase.
Electrode
The small tip size (2 mm diameter) and low oxygen consumption of the OXELP electrode make it ideal for measurements in vivo or in vitro. With a T-Adapter (#5399), the sensor probe can be used also for continuous-flow monitoring of oxygen in small fluid volumes. OXELP also features a fast response time, typically 10 seconds, and the rugged stainless steel sleeve covering the sensor is autoclavable. Optional BNC-to-double banana adaptor (#13347) and BNC cable (#500184) allow ISO2 to be connected directly to your chart recorder.
|
| Specifications |
Additional information not available |
| Manuals and Resources |
Instruction Manual
ISO2-IM-041207.pdf |
| References |
Have you seen a reference to this product in a published paper? If so, email your contact information and the citation and we will send you a free gift! |
| Ordering Information |
To place an order for this product, please contact the appropriate WPI office or distributor.
Customers can order direct from our China office:
WPI China
Address: Rm.20A, No.8 Dong Fang Rd, Liang Feng Building, Lu Jia Zui Financial District, Shanghai PRC
Phone:+86 21 68885517
Fax:+86 21 68885537
Code:200120
|
| Accessories |
|
| Application Notes |
Application Notes
No Application Notes available for this product at this time. |
|
©Copyright 2008 World Precision Instruments, Inc. All Rights Reserved.
