中文 » English » Browse By Category » Pumps and Microinjection » Syringe Pumps » Continuous Cycle Syringe pump
Continuous Cycle Syringe pump
|
* Accepts syringe sizes: 10uL - 60mL
* Minimum Flow Rate: 0.001 uL/hr
* Maximum Flow Rate: 86 mL/hr (60 mL syringe)
* 220-240 V, 60 Hz |
| Description |
Sturdy, reliable, and easy to use
Sturdy and reliable, extremely simple to set up and use - and surprisingly affordable. Liquid crystal displays (LCDs) prompt you through setup: First, select syringe from table stored in the pump's memory and displayed on the LCD. Next, enter the volume to be dispensed. Finally, enter the flow rate, press "start." It's fast and simple. Your settings are permanently stored in memory - there's no need to re-enter them each day. SP pumps feature preset rate and volume control. Just set the volume you want dispensed. Volume is tracked continuously on the LCD display. Then, when the preset volume has been dispensed, the pump shuts off automatically. The easy-to-read digital display provides realtime readings using both parameters and values for clearer, mistake-free readings. The SP200 Series pumps offer TTL and RS-232C interfaces and automatic shutoff under stall conditions.
Features
The SP210c can hold up to four syringes and can cycle continuously back and forth in a push-pull action. As two syringes are infusing, two other syringes are withdrawing at the same rate. At the end of the set volume the direction is automatically reversed and the next cycle begins. With the use of 2-way valves, the pump can empty and refill syringes for a continuous dispense. Holds four syringes, 10 mL to 60 mL each. With larger syringes the full volume may not be usable. [With a 60 mL syring, 40 mL is usable; with a 30 mL syringe, the full volume is usable. |
| Specifications |
Additional information not available |
| Manuals and Resources |
Instruction Manual
sp200-im-092707r.pdf
sp200-programmable-
option.pdf |
| References |
Have you seen a reference to this product in a published paper? If so, email your contact information and the
citation and we will send you a free gift!
|
| Ordering Information |
To place an order for this product, please contact the appropriate WPI office or distributor.
Customers can order direct from our China office:
WPI China
Address: Rm.20A, No.8 Dong Fang Rd, Liang Feng Building, Lu Jia Zui Financial District, Shanghai PRC
Phone:+86 21 68885517
Fax:+86 21 68885537
Code:200120
|
| Accessories |
15623 - Serial Cable, SP Series Pump
15624 - Serial Cable, SP Series Pump
13685 - SP Series Pump-to-Pump Linking Cable |
| Application Notes |
No Application Notes available for this product at this time. |
|
©Copyright 2008 World Precision Instruments, Inc. All Rights Reserved.
