English | 中文
中文 » English » Browse By Category » Pumps and Microinjection » Syringe Pumps » Multi-Syringe Infusion Pump

Multi-Syringe Infusion Pump

/images/big825.jpg * Accepts syringe sizes: 10uL - 10mL (two); 10 uL to 60 mL (six); 10 uL to 140 mL (four)
* Minimum Flow Rate: 0.001 uL/hr
* Maximum Flow Rate: 21 mL/min (10 mL syringe)
* 220-240 V, 60 Hz
Description Sturdy, reliable, and easy to use
Sturdy and reliable, extremely simple to set up and use - and surprisingly affordable. Liquid crystal displays (LCDs) prompt you through set­up: First, select syringe from table stored in the pump's memory and displayed on the LCD. Next, enter the volume to be dispensed. Finally, enter the flow rate, press "start." It's fast and simple. Your settings are permanently stored in memory - there's no need to re-enter them each day. SP pumps feature preset rate and volume control. Just set the volume you want dispensed. Volume is tracked continuously on the LCD display. Then, when the preset volume has been dispensed, the pump shuts off automatically. The easy-to-read digital display provides realtime readings using both parameters and values for clearer, mistake-free readings. The SP200 Series pumps offer TTL and RS-232C interfaces and automatic shutoff under stall conditions.

Features
This feature-laden multi-syringe infusion pump combines a broad speed range and holds a wide range of syringe sizes to meet the requirements of virtually any laboratory application. Features include: accommodates 10 up to 10 mL, or six syringes up to 50 mL, or four syringes up to 140 mL, backlit LCD display, knob locks/unlocks drive block for effortless, drag-free adjustment, simple menu-driven setup: Syringe diameter (selected from displayed table), Dispense volume, Dispense flow rate, continuous dispense volume display, preset volume control and automatic shutoff, settings can be reviewed or changed during operation, optical encoder stall detection, choice of unit selection, last settings stored in permanent memory, built-in RS-232C interface for computer linking or "daisy chaining" up to 100 pumps, and TTL interface for foot switch, timer, relay control; outputs for run indicator, valve control.
Specifications Additional information not available
Manuals and Resources Instruction Manual sp200-im-092707r.pdf
References R. A. Prado-Alcala, M. I. Ruiloba, L. Rubio, R. Solana-Figueroa, C. Medina, R. Salado-Castillo, G.L. Quirate. "Regional infusions of serotonin into the striatum and memory consolidation." Synapse 47. 1001: 169-175.

K.Tobita, B.B. Keller. "End-systolic myocardial stiffness is a load-independent index of contractility in stage 24 chick embryonic heart." Am J Physiol 276. 1999: H2102-H2108.

R. U. Meckenstock, B. Morasch, R. Warthmann, B. Schink, E. Annweiler, W. Michaelis, H.H. Richnow. "13C/12C isotope fractionation of aromatic hydrocarbons during microbial degradation." Environmental Microbiology 1. 1999: 409-414.
Ordering Information To place an order for this product, please contact the appropriate WPI office or distributor.

Customers can order direct from our China office:
WPI China
Address: Rm.20A, No.8 Dong Fang Rd, Liang Feng Building, Lu Jia Zui Financial District, Shanghai PRC
Phone:+86 21 68885517
Fax:+86 21 68885537
Code:200120
Accessories 15623 - Serial Cable, SP Series Pump
15624 - Serial Cable, SP Series Pump
13685 - SP Series Pump-to-Pump Linking Cable
Application Notes Application Notes No Application Notes available for this product at this time.
©Copyright 2008 World Precision Instruments, Inc. All Rights Reserved.